What causes gearbox leakage in HELI Trucks?
If your HELI Trucks experience leakage from the gear box, it could be due to: * Leakage in the plug: Adjust or replace the gasket. * Seeping next to the monitor’s axis: Replace the o-ring. * Seeping in the connecting face of the connecting plate and transmission box housing: Check the connecting surface clearance and apply sealant.
Why is there no steering in my HELI gieen?
If your HELI Trucks aren't steering, it could be due to: * The steering motor not working: Check and replace the power supply line. * The turn angle sensor not working: Check and replace the power supply line. * Damage to the proximity switch: Check if the clearance between the proximity switch and sensing plate is smaller than 5mm, or change the proximity switch. * The steering controller not working: Check the harness and replace it.
How to fix loud gear noise when driving HELI gieen?
If the gears of your HELI Trucks are making a loud noise when driving, this may be due to: * Too much clearance between the gears: Adjust the gears. * Much wear of the gears: Replace the gears. * Lower oil level in oil tank: Add oil.
What to do if the lifting motor is not working in HELI gieen?
If your HELI Trucks' lifting motor isn't working, it could be due to: * A short circuit in the contactor coil: Change the connector. * Abnormal working of the lifting switch: Check and change the switch. * Broken wire: Connect again. * Poor connector contact: Check and repair. * A fault of the lifting controller: Check and repair.
Why are the gears making a loud noise when steering HELI gieen?
If the gears of your HELI Trucks are making a loud noise when steering, it may be because: * There is too much clearance between the gears: Adjust them. * The gears are worn: Replace them.
What causes the parking brake to not work on HELI Trucks?
If your HELI Trucks' parking brake isn't working, it could be because: * The voltage switch is in the power off position: Check the electricity supply. * There is greasy dirt on the friction surface of the friction disc: Clean the dirt and readjust the gas gap.
Why can't side shifting be realized on my HELI gieen?
If side shifting cannot be realized on your HELI Trucks, it may be due to: * Damage of two-position six-way valve: Change it. * Inner leakage of piece for control valve auxiliary function: Change it. * Inner leakage of tilting cylinder: Change it.
Why are the illuminative lights working abnormally on HELI gieen?
If the illuminative lights on your HELI Trucks are working abnormally, it could be due to: * A broken fuse: Change it. * Poor contact of the connector: Check and repair. * A broken bulb: Change it.
Why can't the fork reach forward or backward on my HELI gieen?
If your HELI Trucks' fork can't reach forward or backward, this may be due to: * The two-position six-way valve is damaged: Change it. * Inner leakage of piece for control valve auxiliary function: Change it. * Inner leakage of tilting cylinder: Change the seal ring.
What causes inflexible steering in HELI Trucks?
If your HELI Trucks experience inflexible operation of the steering system, it may be due to inequality of steering wheel rotating. To resolve this, adjust the hand wheel to make it homocentric-ally with the steering axis.
Instructions for safe forklift transportation with external vehicles.
Guidelines for proper forklift storage and battery care during downtime.
Essential pre-operation checks and driver licensing requirements.
Details on the truck's transmission system and its working principle.
Explanation of the rear axle structure and its role in truck operation.
Description of the electric steering system components and operational logic.
Information on the design and function of the truck's supporting wheel assembly.
Details on the service and parking brake systems.
Components, specifications, and principle diagrams of the hydraulic system.
Information regarding the truck's body components and adjustments.
Structure, components, and maintenance procedures for the lifting system.
Identifies and resolves common issues related to the transmission system.
Diagnoses and rectifies problems encountered with the steering system.
Troubleshooting steps for issues with the parking brake functionality.
Addresses common faults and solutions for the hydraulic system's operation.
Common faults and remedies for the truck's electrical components and systems.
Schedule and procedures for regular upkeep to ensure optimal truck performance.
Specifications and types of oils and lubricants required for the forklift.
Visual guide detailing lubrication points, types, and service intervals.
Technical data on the dimensions and weights of major truck components.
Step-by-step instructions for the safe removal of the mast assembly.
Procedures for disassembling and removing the overhead guard.
Technical data on vibration levels during different operational modes.
To Next Page
General
