Need help?Do you have a question about the HELI G Series and is the answer not in the manual?
Step-by-step instructions for safely delivering forklift trucks via container or transport.
Procedures for storing forklift trucks, including rust prevention, battery charging, and wheel wedging.
Critical checks and precautions to ensure the forklift is safe for operation.
Guidelines and rules for the correct and safe operation of the forklift truck.
Essential pre-startup checks and daily maintenance tasks for the forklift.
Technical specifications for CPD10, CPD15, and CPD18 forklift models.
Technical specifications for CPD20 and CPD25 forklift models.
Technical specifications for CPD30 and CPD35 forklift models.
Additional technical specifications for CPD30 and CPD35 forklift models.
Further technical specifications for CPD30 and CPD35 forklift models.
Final technical specifications for CPD30 and CPD35 forklift models.
Dimensions and weights of major dismountable forklift components.
Details on the construction, principle, and assembly of the forklift's transmission system.
Explanation of the brake system's construction, operation, and maintenance procedures.
Overview of the forklift's steering system, its function, and importance.
Explanation of how the forklift's steering system operates to change direction.
Detailed breakdown of the components that make up the forklift's steering system.
Information regarding the forklift's steering axle, including its parts and functions.
General introduction to the forklift's electric system and its control systems.
Details on the instrument display, its indicators, and operational functions.
Information on the various motor controllers used in the forklift and their advantages.
Specifications for travelling and lifting motors, including power, voltage, and speed.
General description of the forklift's hydraulic system, its components, and operation.
Details on the working principle, main parts, and maintenance of the gear oil pump.
Information on the control valve's construction, operation, and safety relief features.
Description of the single-acting lift cylinder, its components, and operation.
Function and working principle of the cut-off valve for preventing sudden load drops.
Explanation of the flow regulator valve used to control descending speed of forks.
Description of the double-action tilt cylinder, its components, and mast tilting mechanism.
Details regarding the oil tank, including filters and breather for oil cleanliness.
Schematic diagram illustrating the hydraulic oil circuit of the forklift.
Overview of the two-stage roller type lifting system and its main parts.
Description of the inner and outer masts, their construction, and roller arrangements.
Details on the lift bracket, its movement, and the rollers that support it.
Explanation of the placement and function of main and side rollers in the lifting system.
Instructions for adjusting the lift cylinder, lift bracket, and replacing rollers.
To Next Page
General
