Why can't the fork tilt forward and backward on my HELI gieen?
If the fork on your HELI Trucks cannot tilt forward and backward, it may be due to: * Damage of tilting balance valve or two-position six-way valve: Change the valve. * Inner leakage of piece for control valve auxiliary function: Change the piece. * Inner leakage of tilting cylinder: Change the seal ring.
Why can't the fork reach forward or backward on my HELI gieen?
If your HELI Trucks' fork can't reach forward or backward, this may be due to: * The two-position six-way valve is damaged: Change it. * Inner leakage of piece for control valve auxiliary function: Change it. * Inner leakage of tilting cylinder: Change the seal ring.
What causes gearbox leakage in HELI Trucks?
If your HELI Trucks experience leakage from the gear box, it could be due to: * Leakage in the plug: Adjust or replace the gasket. * Seeping next to the monitor’s axis: Replace the o-ring. * Seeping in the connecting face of the connecting plate and transmission box housing: Check the connecting surface clearance and apply sealant.
Why are the illuminative lights working abnormally on HELI gieen?
If the illuminative lights on your HELI Trucks are working abnormally, it could be due to: * A broken fuse: Change it. * Poor contact of the connector: Check and repair. * A broken bulb: Change it.
What to do if the horn is not working on HELI gieen?
If the horn on your HELI Trucks is not working, it could be due to: * Poor connector contact: Check and change. * Poor contact with the horn switch: Check and repair. * Broken horn: Change it.
Why can't side shifting be realized on my HELI gieen?
If side shifting cannot be realized on your HELI Trucks, it may be due to: * Damage of two-position six-way valve: Change it. * Inner leakage of piece for control valve auxiliary function: Change it. * Inner leakage of tilting cylinder: Change it.
Instructions for safe forklift transportation with external vehicles.
Guidelines for proper forklift storage and battery care during downtime.
Essential pre-operation checks and driver licensing requirements.
Details on the truck's transmission system and its working principle.
Explanation of the rear axle structure and its role in truck operation.
Description of the electric steering system components and operational logic.
Information on the design and function of the truck's supporting wheel assembly.
Details on the service and parking brake systems.
Components, specifications, and principle diagrams of the hydraulic system.
Information regarding the truck's body components and adjustments.
Structure, components, and maintenance procedures for the lifting system.
Identifies and resolves common issues related to the transmission system.
Diagnoses and rectifies problems encountered with the steering system.
Troubleshooting steps for issues with the parking brake functionality.
Addresses common faults and solutions for the hydraulic system's operation.
Common faults and remedies for the truck's electrical components and systems.
Schedule and procedures for regular upkeep to ensure optimal truck performance.
Specifications and types of oils and lubricants required for the forklift.
Visual guide detailing lubrication points, types, and service intervals.
Technical data on the dimensions and weights of major truck components.
Step-by-step instructions for the safe removal of the mast assembly.
Procedures for disassembling and removing the overhead guard.
Technical data on vibration levels during different operational modes.
To Next Page
General
