31
User Guide
F - OPERATION OF LEDS
Please note: a loss of GPS signal can aect the speed of LED ashing (faster
LED ashing).
If you notice any other malfunctions, please contact your dealer or our after sales
service via e-mail sav@helite.com or by phone +33 3 80 35 48 26.
System operational
Green ashing LED / no beep
You can ride.
Battery low
Orange ashing LED / no beep
You need to
recharge the vest.
You can still
ride for 2 hours.
Battery almost empty
Orange ashing LED / 4 beeps
30 minutes of
battery life
remaining.
Battery charging
Orange LED / no beep
Wait until the
charging is
completed.
Charging completed
Green LED / no beep
when the charger is still connected
Unplug the
charger.
Pairing in process
Blue LED / 1 beep every 5 sec.
(during 30 sec.)
You have 30 se-
conds to pair the
fork sensor.
Pairing succeeded
Blue LED / 1 beep every 2 sec.
(2 short beeps when the sensor is already
recognized)
The vest and the
fork sensor are
paired.
Pairing failed
Red LED / 4 beeps
(or too many sensors recognized
by the vest)
Restart the
pairing.
Disconnected e-cartridge, empty
e-cartridge or damaged cable.
Red LED / 1 beep every second
(while the e-cartridge is not connected or
replaced)
Connect or
replace the
e-cartridge.
Option with fork sensor
SDU
To Next Page
Loading...
