EasyManuals Logo

Helite E-TURTLE User Manual

Helite E-TURTLE
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
User Guide
26
CAUTION
The use of the fork sensor is not recommended with the use of non-approved
accessories (exhaust pipe) and on a non-approved motorcycle. Some motorcycles
prepared only for the race track may exceed a too high vibration threshold and
mislead the sensor.
C. PRECAUTIONS BEFORE USING THE AIRBAG SYSTEM
If one of these conditions is not validated, you may not be protected
properly.
The vest is adjusted correctly to your size.
The e-cartridge must be new and properly connected to the system.
The vest is properly closed.
The vest is suciently charged (green LED on).
The fork sensor is recognized by the vest (version with fork sensor).
The green LED is on and ashes.
4. Reactivating the airbag system after ination
After ination, you need to reactivate the airbag system. Only replace the e-cartridge by
a Helite branded e-cartridge of the same capacity.
1. Get access to the e-cartridge (zip or velcro).
2. Remove the empty e-cartridge.
y a) Disconnect the e-cartridge.
y b) Unscrew the e-cartridge.
For the steps 2 to
5 the vest must
always be
switched o.
!
1 1
5
5
3 4
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Helite E-TURTLE and is the answer not in the manual?

Helite E-TURTLE Specifications

General IconGeneral
Battery Life25 hours
Charging Time3 hours
TypeAirbag Vest
ActivationElectronic
Airbag Inflation Time0.1 second
Protection ZonesBack, Neck, Chest
SAS-TEC back protectorIncluded
CompatibilityMotorcycle
ReusabilityReusable after cartridge replacement
WeightApproximately 1.5 kg (including back protector)

Related product manuals