EasyManuals Logo

Helite E-TURTLE User Manual

Helite E-TURTLE
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
User Guide
28
PRECAUTIONS AFTER AIRBAG INFLATION
Before reusing the airbag you must check the following points:
The airbag is not damaged.
The used e-cartridge is replaced by a new Helite e-cartridge of the same
capacity.
The airbag is deated.
The new e-cartridge is properly connected with the vest.
Other precautions before each use:
The vest is properly adjusted.
The vest is correctly closed.
The battery of the vest is suciently charged (green LED on).
The fork sensor is recognized by the vest (if fork sensor option).
The green LED is on and ashes.
5. Technical description
The Helite electronic airbag vests detect the rider’s movements and trigger the
airbag if an accident or fall situation is regognized.
An optional fork sensor (SDU) installed on the fork detects the movements of the
motorcycle. Combined with the sensor (CDU) in the vest, it improves the detection
of falls and accidents. The fork sensor is an option that is only compatible with Helite
motorcycle electronic vests.
CAUTION After ination, the airbag automatically deates slowly. External damage to
the vest can be detected by very rapid deation (less than 5 sec). If you observe any
marks on the airbag, please contact us or take it to an authorized dealer for servicing.
In the event of extensive external or internal damage, repair may not be possible.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Helite E-TURTLE and is the answer not in the manual?

Helite E-TURTLE Specifications

General IconGeneral
Battery Life25 hours
Charging Time3 hours
TypeAirbag Vest
ActivationElectronic
Airbag Inflation Time0.1 second
Protection ZonesBack, Neck, Chest
SAS-TEC back protectorIncluded
CompatibilityMotorcycle
ReusabilityReusable after cartridge replacement
WeightApproximately 1.5 kg (including back protector)

Related product manuals