Helite E-TURTLE - Product Presentation

User Guide
20
1. Product presentation
The electronic airbag system contains a vest, an e-cartridge and a USB cable.
a. Vest: The e-Turtle contains an airbag, a back protector level 2 and a CDU sensor
(Crash detection unit). The CDU sensor analyzes the motion in context (position in
space of the rider, speed, etc.) and detects accidents. The e-GP Air contains an airbag,
a back, a chest protector and a CDU sensor.
b. e-Cartridge: inates the airbag in the event of a fall or an accident. It is for single
use only and must be replaced after each ination (see page 26).
c. USB cable: to recharge the battery of the vest (see page 24). Caution: only the USB
cable is included, you can plug it into any standard USB charger.
With fork sensor option
d. Fork sensor: analyzes the movements of the motorcycle. Discreet and autonomous,
it needs to be installed on the motorcycle fork (see page 22). The fork sensor has an
autonomy of around 5 years (not rechargeable).
e. Magnet: used to pair vest and fork sensor (see page 21) and also for periodic control.
f. 3 bracelets, 2 screws, 1 Allen key, 1 shim and a foam: you need these elements to
install the fork sensor on the motorcycle (see page 21 for rst use).
A
a)
b)
c)
d)
e)
f)