25
User Guide
Green LED: system operational
Orange LED: battery low
Blue LED: pairing *
Red LED: problem
No LED: vest o or in sleep mode
4. VEST LED DESCRIPTION
To know if the system is working properly, here are the 4 LED colors used and their
dierent signications:
More info on page 31 about the operation of the LEDs and the beeps.
*only for additional fork sensor option.
B. THE FORK SENSOR - SDU (OPTIONAL)
Once installed and correctly paired (see First use page 20), the fork sensor is completely
autonomous. Its lifespan is about 5 years, you do not need to recharge it. To check the
battery status of your sensor, pass the magnet over the sensor.
GOOD TO KNOW:
To delete all the sensors that are paired with the vest, press the
button on the vest that is switched on for 8 seconds.
It is possible to pair several fork sensors to a single vest (5 maximum), for example if
you have several motorcycles. For each fork sensor you will have to repeat this pairing
process. It is possible to pair as many vests as you like with one fork sensor.
Rider and pillion rider can use the same fork sensor.
Green LED: battery OK
Red LED: battery low = you need to
change the sensor.
A beep sound on the vest:
the fork sensor and the vest are paired.
To Next Page
Loading...
Need help?
General
