Need help?Do you have a question about the HELIX H 1000 ESPRIT and is the answer not in the manual?
Power| continuous power at 4 Ohms RMS/12 V | 4 x 50 W |
|---|---|
| continuous/max power at 4 Ohms/13.8 V | 4 x 70/140 W |
| continuous/max power at 2 Ohms/13.8 V | 4 x 125/250 W |
| continuous/max power at 4 Ohms bridged | 2 x 250/500 W |
Audio Specifications| frequency response | 20 Hz - 20 kHz, +/- 0.2 dB |
|---|---|
| total harmonic distortion | < 0.009% |
| TIM distortion | < 0.016% |
| damping factor | > 300 |
| signal to noise ratio | > 100 dB |
Input Specifications| input impedance | 10 kOhms |
|---|---|
| input sensitivity | 700 mV - 8 V |
Physical Characteristics| fuse | 2 x 25 Ampere |
|---|---|
| dimensions (H x W x D) in mm | 31.5 x 200 x 336 |
| weight | 2.6 kgs |
Power| continuous power at 4 Ohms RMS/12 V satellites woofer | 4 x 40 W / 1 x 140 W |
|---|---|
| continuous/max power at 4 Ohms/13.8 V satellites woofer | 4 x 60/120 W / 1 x 170/340 W |
| continuous/max power at 2 Ohms/13.8 V satellites woofer | 4 x 80/160 W / 1 x 250/500 W |
| continuous/max power at 4 Ohms bridged | 2 x 160/320 W |
Audio Specifications| frequency range | 20 Hz - 20 kHz, +/- 0.2 dB |
|---|---|
| total harmonic distortion | < 0.009% |
| TIM distortion | < 0.016% |
| damping factor | > 300 |
| signal to noise ratio | > 100 dB |
Input Specifications| input impedance | 10 kOhms |
|---|---|
| input sensitivity | 700 mV - 8 V |
Physical Characteristics| fuse | 2 x 30 Ampere |
|---|---|
| dimensions (H x W x D) mm | 31.5 x 200 x 432 |
| weight | 3.6 kg |
Power| continuous power at 4 Ohms RMS/12 V | 1 x 300 W |
|---|---|
| continuous/max power at 4 Ohms/13.8 V | 1 x 350/700 W |
| continuous/max power at 2 Ohms/13.8 V | 1 x 600/1200 W |
Audio Specifications| frequency range | 20 Hz - 20 kHz, +/- 0.2 dB |
|---|---|
| total harmonic distortion | < 0.009% |
| signal to noise ratio | > 100 dB |
| TIM distortion | < 0.016% |
| damping factor | adjustable from > 50 - >800 |
Input Specifications| input impedance | 10 kOhm |
|---|---|
| input sensitivity | 600 mV - 8 V |
Physical Characteristics| fuse | 4 x 25 Ampere |
|---|---|
| dimensions (H x W x D) in mm | 31.5 x 200 x 432 |
| weight | 3.6 kg |
Provides guidance on installing the amplifier in a dry, well-ventilated location and securing it safely.
Details on connecting HELIX amplifiers to vehicle systems, emphasizing 12-volt minus pole connection and proper cabling.
Lists available HELIX Cross Cards (HCCs) and their respective filter functions (HP/LP, subsonic) and settings.
Instructions for connecting the remote lead, ground cable, and battery cable, including fuse requirements.
Explanation of the Color Protection System (CPS) LEDs and RCA signal input details.
Details on mono/stereo selection, subsonic filter, speaker terminals, input sensitivity, and damping factor.
Explanation of the integrated parametric equalizer and its various operation modes.
Details on using controls for phase, center frequency, bandwidth, and level adjustments for sound tuning.
Guidance on setting the active crossover using switches and controls for high pass, low pass, or band pass.
Detailed technical data including power output, frequency response, THD, S/N ratio, and dimensions.
Technical details for the H 500 ESPRIT, covering power, frequency, distortion, impedance, and physical size.
Comprehensive technical specifications for the H 1000 ESPRIT, including power, frequency, and input/output details.
To Next Page
