Need help?Do you have a question about the HELIX DARK BLUE FIVE and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| Class | D |
| Input impedance | 10 kOhms |
| Fuse rating | 30 A |
| Input sensitivity | 0.5 - 6 Volts |
Details on connecting the main battery cable, remote lead, and ground cable to the amplifier unit.
Information regarding the amplifier's fuse rating and its purpose for protection.
Overview of speaker output terminals and RCA signal input connectors for various channels.
Description of level and frequency controls specific to the mono bass channel 5.
Adjustment for low-pass and high-pass filter frequencies for channels 3 and 4.
Adjustment for the high-pass filter frequency for channels 1 and 2.
Switches for selecting channel modes (2/4/5-channel) and filter types (full range, high-pass, band-pass).
Explanation of the Power LED and Protection LED status indicators.
Specific instructions for connecting the ground cable to a suitable chassis point.
Guidance on connecting the remote lead and the main battery power cable.
Advice on fuse placement, speaker connection polarity, and impedance limits.
Details on adjusting input sensitivity and the bass boost function for optimal performance.
Instructions for setting low-pass, high-pass, and band-pass crossover frequencies.
Explanation of how to configure the amplifier for 2-channel, 4-channel, or 5-channel operation.
Information on the protection LED and common causes for amplifier shutdown.
Covers warranty period, exclusions, and procedures for service claims.
Detailed output power ratings for various impedance and bridged configurations.
Technical specifications for frequency range, crossover points, and filter slopes.
Information on distortion, signal-to-noise ratio, and input sensitivity.
Details on dimensions, weight, input impedance, and fuse requirements.
Diagrams and guidance for connecting speakers in 5-channel and 4-channel configurations.
Diagrams and guidance for connecting speakers in 3-channel and 2-channel configurations.
Wiring configurations for a fully active system with two-way speakers and a subwoofer.
Illustrations showing how to set input modes for 5-channel, 4-channel, and 2-channel operation.
To Next Page
