Need help?Do you have a question about the HELIX D FOUR and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Class | D |
| Frequency Response | 10 Hz - 30 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| Input Impedance | 10 kOhms |
| Fuse | 25 A |
Read manual carefully, follow instructions. Ensure proper function and prevent damage/injury.
Install in vehicles with 12V negative terminal chassis ground. Use appropriate fuses and cables.
4-channel high-level input to connect directly to loudspeaker outputs of OEM/aftermarket radios.
Instructions for connecting low-level line inputs and high-level speaker inputs.
Mandatory to adapt input sensitivity to avoid amplifier damage.
Disconnect battery before installing; connect +12V and GND cables with appropriate gauge and fuse.
Connect speaker outputs to loudspeakers, ensure correct polarity and impedance.
To Next Page
