Hellenbrand Iron Curtain System IC-10 User Manual

For systems manufactured after October 1997
Manufactured by:
HELLENBRAND, INC.
404 Moravian Valley Road • PO Box 187
Waunakee, Wisconsin 53597
Phone: 608-849-3050 • Fax: 608-849-7398
Web: www.hellenbrand.com • Email: info@hellenbrand.com
Owner’s Manual
©2003
TM
TM
All manuals and user guides at all-guides.com
all-guides.com

Hellenbrand Iron Curtain System IC-10 Specifications

General

Brand	Hellenbrand
Model	Iron Curtain System IC-10
Category	Water Filtration Systems
Language	English

Summary

INSTALLATION DATA

Air Recharge & Air Bleed-Off Valve Fitting Connection Assembly

Aeration Head Fitting Connection

Iron Filtration System Operation

Principle of Operation

Explains the three-step process: oxidation, precipitation, and filtration.

Operation of Aeration Pump

Operating Conditions and Application Guidelines

General Application Guidelines for Residential Iron Curtain Systems

Installation and Setup

Pre-Installation Check List

Checklist of items and conditions before installing the system.

Installation Instructions

Step-by-step guide for installing the system.

Start-Up Procedures

Procedures for initial system startup after installation.

System Configuration and Maintenance

Specifications

Timer Settings and Operation

How To Set Timer

Guide on setting regeneration days and time of day.

Manual Operations

How to Set Regeneration Time

Adjusting the regeneration time.

How To Manually Regenerate Your Water Filter At Any Time

How To Manually Advance Control Center to a Specific Cycle

Setting the Regeneration Cycle Program

Aeration Pump Repair and Maintenance

Iron Curtain Aeration Pump Repair Instructions

Step-by-step guide for repairing the aeration pump.

Control Valve Assemblies and Maintenance

IC-10 Series Control Valve Assembly

IC-12 Series Control Valve Assembly

Replacing Piston Assembly

Detailed steps for replacing the piston assembly.

Replacing Seal Kit

Procedures for replacing piston seals and spacers.

Troubleshooting Common Issues

Inadequate Backwash of Filter

Addresses issues with insufficient filter backwash.

Fails to Regenerate

Troubleshoots problems with system regeneration failures.

High Contaminant Levels

Addresses contaminant levels exceeding system limits.

Inadequate Aeration

Troubleshoots issues related to insufficient aeration.

Troubleshooting Further Issues

Water Leaking from Relief Valve

Addresses problems with relief valve leaks.

Water is Effervescent

Loss of Pressure

Air Spurting at Fixtures

Loss of Media Through Drain Line