HELLER HPAC10 User Manual

Identification
Front
1. Control panel
2. LCD Display
3. On/Off button
4. Remote control receiver
5. Air outlet vent
6. Louver
7. Castor
8. Air inlet
9. Remote control
10. Handle
Back
10. Exhaust air outlet vent
11. Power cord
12. Master filter
13. Side filter
14. Draining pipe

HELLER HPAC10 Specifications

Operating Environment

permissible excessive operating pressure (suction)	1.5 MPa
permissible excessive operating pressure (discharge)	5.5 MPa
maximum allowable pressure (low pressure side)	1.7 MPa
maximum allowable pressure (high pressure side)	5.5 MPa

Power

power supply	220-240 V / 50 Hz
rated input (cooling)	1050 W

Performance

cooling capacity	2.93 kW
air flow	360 m3/h
noise	55 dB(A)

Refrigerant

refrigerant type	R410a
refrigerant charge	500 g

Weight and Dimensions

net weight	25 kg
gross weight	30 kg
dimensions (WxHxD)	433 x 795 x 330 mm