HelloBaby HB32 - Technical Data; Troubleshooting; Maintenance

9. TEC HNIC AL DATA
10. TROU BLE SHOOTIN G
No reception on the
monitor
Frozen Picture on
Screen
Audio feedback
(high pitched noise)
Interference or poor
reception
* The power adapters may not be properly connected;
* Confirm that the camera and monitor are ON;
* Camera may be far away from the monitor;
* Camera and monitor may not be properly paired; follow PAIRING instructions;
* Move the monitor close to the camera;
* The camera or monitor may be placed too close to many metal objects;
* Other electronic devices may be interfering with the signal;
* The battery power is running low;
* The camera and monitor may be placed too closed;
* The volume on the monitor may be set too high;
* Repower the baby unit (plug out the adapter, then plug it into the
socket again);
* Press the RESET key at the back of parent unit;
11. MAINTEN ANC E
*Cleanyourbabymonitorwithaslightlydamporanti-staticcloth.
*Neverusecleaningagentsorsolvents.
2403.5~2475.5MHz
Frequency
Power adapter
Input
Parent Unit: Input: 100-240VAC 50/60Hz
Output: 6V DC 600mA
Camera Unit: Input: 100-240VAC 50/60Hz
Output: 6V DC 600mA
Operation
environment
Up to 1000ft (300m) outdoor line of sight
Up to 165ft (50m) indoor
Operating Range
Display
3.2'' TFT LCD
Battery (Parent Unit)
Battery Life
Li-ion 3.7V 950mAh (3.515Wh)
Up to 6 hours
RelativeHumidity:15%-85%
Camera unit and parent
unit RF power ( for CE)
less than 20dBm
Operation Temperature: +32F~+104F (0℃~40℃)
Battery Charging Temperature: +50F~+104F(10℃~40℃)