Helmer QuickThaw DH2 - Safety; Components; Installation; General Operation

i
360094-1/J
1 Safety ..................................................................1
2 Components .............................................................2
3 Installation ..............................................................6
3.1 Location requirements ..............................................................6
3.2 Power on ........................................................................6
3.3 Install external thermometer .........................................................6
3.4 Specications .....................................................................6
4 General Operation ........................................................8
4.1 Fill chamber ......................................................................8
4.2 Thaw times .......................................................................8
4.3 Loading bags .....................................................................8
4.4 Enable/disable agitation ............................................................10
4.5 Start/stop/pause thaw process .......................................................10
4.6 Drain chamber ...................................................................11
4.7 Remove baskets .................................................................11
5 Maintenance schedule ....................................................12
Copyright and trademark information
Copyright © 2011 Helmer, Inc.
CleanBath™ and QuickThaw™ are trademarks of Helmer, Inc
All other trademarks and registered trademarks are the property of their respective owners.
Contents
Contents