Need help?Do you have a question about the Helmholz PN/EtherNetIP Coupler and is the answer not in the manual?
General| Category | Network Hardware |
|---|---|
| Manufacturer | Helmholz |
| Model | PN/EtherNetIP Coupler |
| Protocols | PROFINET, EtherNet/IP |
| Power Supply | 24 V DC |
| Operating Temperature | 0°C to +55°C |
| Storage Temperature | -25°C to +70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Protection Class | IP20 |
| Mounting | DIN rail |
| Device Type | Coupler |
| Interface | RJ45 |
| Transmission Rate | 100 Mbps |
| Configuration | Via web interface or configuration software |
| Diagnostic | LEDs, Web-based diagnostics |
This guide is for trained personnel familiar with automation engineering and national standards.
The device must be installed in a protected enclosure to prevent unauthorized operation and ensure safety.
This document covers initial commissioning. Latest version is available online.
Enables data transmission between PROFINET and EtherNet/IP networks, facilitating live I/O data exchange.
Details the RJ45 socket usage for connecting PROFINET (X1) and EtherNet/IP (X2) networks.
Critical instruction to connect the functional grounding connection (FG/FE) to the reference potential.
Download the GSDML file from the website and install it in TIA Portal for device description.
Configure parameters like IP address, subnet mask, and hostname via PROFINET or web interface.
Assign a PROFINET device name for the controller to recognize and configure the coupler.
Access the device's web interface via the network to download the EDS file and set initial passwords.
Import the EDS file into Rockwell Studio 5000 using the "EDS Hardware Installation Tool".
Understand the 2-byte status information provided via the PROFINET input image for operational monitoring.
Utilize control bits in the PROFINET output image to manage and reset the coupler's functions.
Configure MQTT publishers for distributing data to MQTT brokers on PROFINET and EtherNet/IP sides.
To Next Page
