14
Chapter 2: Installation
Power/Data Cable Considerations
Before mounting the V104s consider the following regarding power/data
cable routing:
• Cable must reach an appropriate power source
• Cable may connect to a data storage device, computer, or other
device that accepts GPS data
• Avoid running the cable in areas of excessive heat
• Keep cable away from corrosive chemicals
• Do not run the cable through door or window jams
• Keep cable away from rotating machinery
• Do not crimp or excessively bend the cable
• Avoid placing tension on the cable
• Remove unwanted slack from the cable at the V104s end
• Secure along the cable route using plastic wraps
Improperly installed cable near machinery can be dangerous
To Next Page
Loading...
