How to fix HemoCue Hb 301 Medical Equipment E07 error?
If the HemoCue Medical Equipment displays E07, it means the battery power is too low. Replace the batteries with 4 type AA batteries after turning off the analyzer or use the power adapter.
General| Sample Volume | 10 µL |
|---|---|
| Sample Material | Capillary, venous or arterial whole blood |
| Wavelengths | 506 nm and 880 nm |
| Calibration | Factory calibrated |
| Precision | CV ≤ 1.5% |
| Measurement Principle | Photometry |
| Measurement Range | 0-25.6 g/dL |
| Analysis Time | Within 1 minute |
| Operating Temperature | 15-30°C (59-86°F) |
| Power Supply | AC adapter or 4 x AA batteries |
| Weight | 350 g (including batteries) |
| Battery Life | Approximately 1, 000 tests |
| Dimensions | 85 x 160 x 43 mm |
| Accuracy | Within ±1.5% or ±0.3 g/dL, whichever is greater |
Lists and illustrates all parts included with the HemoCue Hb 301 Analyzer.
Steps to set up, power on, and confirm analyzer readiness for use.
Detailed procedure for collecting and measuring capillary blood samples.
Procedure for performing tests with control materials for quality assurance.
How to connect the analyzer for data transfer or printing results.
Instructions for cleaning the cuvette holder and optronic unit.
Solutions for common analyzer errors and symptoms.
Details on dimensions, weight, operating conditions, accuracy, and certifications.
Guidance on EMC requirements and recommendations for safe operation.
Information on product warranty, service, and environmental disposal.
To Next Page
