To Next PageTo Next PageWhat to do if HENNESSY INDUSTRIES Coats 1100 Wheel Balancers show Overload Protection?
If your HENNESSY INDUSTRIES Wheel Balancer displays an Overload Protection message, allow the fan to cool the motor for at least 30 minutes before resuming use.
How to troubleshoot E1 error on HENNESSY INDUSTRIES Wheel Balancers?
To troubleshoot an E1 error on HENNESSY INDUSTRIES Wheel Balancers, check the power supply to the balancer and the motor connection. Verify both are properly connected.
What to do if HENNESSY INDUSTRIES Coats 1100 display error E4?
If your HENNESSY INDUSTRIES Wheel Balancer shows error code E4, disconnect the power supply and correct the wiring.
What causes E6 error on HENNESSY INDUSTRIES Coats 1100 Wheel Balancers and how to fix it?
The E6 error on HENNESSY INDUSTRIES Wheel Balancers indicates that the encoder is either not connected or has failed. To fix this, disconnect the power supply and repair the encoder.
What does Err Hod mean on HENNESSY INDUSTRIES Wheel Balancers?
If you see 'Err Hod' on your HENNESSY INDUSTRIES Wheel Balancer, verify the hood switch. Ensure the hood is lowered to spin and that the hood switch is working correctly.
What should I do if my HENNESSY INDUSTRIES Coats 1100 Wheel Balancers display error E2?
If your HENNESSY INDUSTRIES Wheel Balancer displays error E2, check the Wheel DIA and power supply. Then press STOP - EXIT.
How do I fix the E3 error on HENNESSY INDUSTRIES Wheel Balancers?
To address an E3 error on HENNESSY INDUSTRIES Wheel Balancers, check the motor and encoder function and wiring. Then press STOP - EXIT.
What does error E5 mean on HENNESSY INDUSTRIES Wheel Balancers, and how can I resolve it?
Error E5 on HENNESSY INDUSTRIES Wheel Balancers suggests an issue with the power supply or motor connection. To resolve it, verify the power supply and motor connection, then press STOP - EXIT.
What does 'Err Hub' mean on HENNESSY INDUSTRIES Coats 1100 Wheel Balancers and how to solve it?
If your HENNESSY INDUSTRIES Wheel Balancer displays 'Err Hub', verify the wheel is mounted properly on the shaft and check repeatability.
What to do if HENNESSY INDUSTRIES Coats 1100 Wheel Balancers show E25 error?
If your HENNESSY INDUSTRIES Wheel Balancer shows error E25, tighten the hub nut and respin.
General| Brand | HENNESSY INDUSTRIES |
|---|---|
| Model | Coats 1100 |
| Category | Wheel Balancers |
| Language | English |
