HENNESSY INDUSTRIES Coats 885 - User Manual

Manual Part No.: 85611582 00
Revision: 05/19
See
Balancing Your
First Tire
on page 1.
885 Wheel Balancer
Safety Instructions
Set Up Instructions
Operation Instructions
Maintenance Instructions
READ these instructions before placing unit in
service. KEEP these and other materials delivered
with the unit in a binder near the machine for ease
of reference by supervisors and operators.
1601 J. P. Hennessy Drive, La Vergne, TN USA 37086 615/641-7533 800/688-6359 www.coatsgarage.com
HENNESSY INDUSTRIES LLC Manufacturer of COATS®, AMMCO® and BADA® Automotive Service Equipment and Tools.

Summary

IMPORTANT SAFETY INSTRUCTIONS

*Balancing Your First Tire

Operating the Balancer

Standard Back Cone;Collet Mounting

Details the method for mounting standard equipment and steel wheels using a cone from the inner hub.

Operation Functions Menu

Use of the Wheel Balancer

Provides step-by-step instructions for using the wheel balancer for standard balancing.

Result of the measurement and weight application

BALANCING WITH ADHESIVE WEIGHTS (ALU)

Wheel dimensions setting

Details how to measure and input wheel dimensions for adhesive weight balancing.

BALANCING WITH A MIX OF ADHESIVE AND CLIP-ON WEIGHTS AND STATIC BALANCING

EXACT POSITIONING OF THE ADHESIVE WEIGHT BY MEANS OF THE GAUGE WITH CLIPS

HIDE THE ADHESIVE WEIGHTS (Behind Spoke)

AUTOMATIC MINIMIZATION OF STATIC UNBALANCE

Unbalance Match Mount Balance

Setup

BALANCING MACHINE CALIBRATION

Automatic Gages Calibration

Distance Gauge Calibration

Step-by-step instructions for calibrating the distance gauge.

Diagnostics

INCONSISTENT UNBALANCE READINGS

Explains potential causes for re-detected unbalance after a wheel has been balanced.

Installation Instructions

HENNESSY INDUSTRIES Coats 885 Specifications