How to fix control error code “E-10” on Henny Penny Fryer?
If the Henny Penny Fryer displays control error code “E-10”, it indicates an open high limit circuit. You can try to reset the high limit by gently pushing a small screwdriver or Allen wrench into the hole in the heating element hinge. If it doesn't reset, the high limit might need to be replaced.
What to do if my Henny Penny Fryer power switch is ON but the fryer is completely inoperative?
If the Henny Penny Fryer's power switch is ON, but the fryer is completely inoperative, here's what to check: * Ensure the fryer is properly plugged in. * Inspect the breaker or fuse at the supply box. * See if the circuit breakers in the fryer have tripped. To check, open the left door and reset the circuit breakers on the fryer.
General| Model | EEE-141 |
|---|---|
| Product Name | Evolution Elite |
| Frypot Width | 14 inches |
| Frypot Depth | 14 inches |
| Number of Fry Pots | 1 |
| Type | Open Fryer |
| Oil Capacity | 50 lbs |
| Electrical | 208V/240V |
| Phase | 3 |
| Controls | Digital |
| Temperature Range | 200°F |
| Oil Filtration | Automatic |
To Next Page
