Before First Ride
15 16
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
To charge the battery when not connected to the bike, you need the Hepha
EC-P100 Charger.
Connect the battery to the charger. A full charge of the battery takes approxi-
mately 4 hours. The indicator light on the charger is yellow while charging. Once
the battery is fully charged, the indicator light will turn green.
when the indicator light is red, it indicates a charging error, contact Hepha.
Put the battery back in the down
tube. Position the lower end first,
with the electrical contacts. Press
the upper part of the battery into
the holder until it locks with a
"click".
Turn keyhole right to vertical，
remove the battery key.
Put the battery cover back. Position the lower end first. Press the upper part to
cover the battery. Hold it with one hand. Push up the steel tab with the other
hand, press the battery cover to make it cover the battery correctly and then
push down the steel tab. Make sure the battery cover is fixed and stable.
Hepha EC-P100 Charger
indicator light
position the
lower end
Before First Ride
To Next Page
Loading...
