If the bike is not used for a long period, the following points must be noted:
Dispose of excess lubricants, cleaning agents and paints. Dispose of these agents as
specified on their packaging and take local legislation into consideration. If you are
discarding a bike, return it to us or dispose of it in accordance with local laws.
Storage Maintenance
19 20
Storage
Disposal
Maintenance
Regular inspection
You'll be 15% more energy-efficient by keeping 3.0 Bar (42Psi) of air pressure in your tires.
Recommended tire inflation pressure: 2.0-3.5 Bar / 35-70 Psi.
Pump your tires
- Clean the bike.
- Store the bike in a dry, frost-free place where it is protected against major
fluctuations in temperature.
- Make sure the battery and display get a full charge every six months.
Electric bicycles: EN 15194
The declaration of conformity for your ebike model is enclosed with this user manual.
Note: If the display is out of power and cannot be turned on, charge the display via USB
Type-C cable.
Have your retailer check cycle at the following intervals:
If you use the cycle in difficult conditions or ride more than 2,000 km / 1,250 mi* per year,
shorten the inspection intervals and have an inspection carried out by your retailer every
6 months.
*whichever is the earliest
Inspection Distance travelled Hours of operation Duration of use
1st Inspection
2nd Inspection
Each subsequent
inspection
after 300 km /
190 mi* or
after 2,000 km /
1,250 mi* or
after a further
2,000 km /
1,250 mi* or
after 15 hours of
operation* or
after 100 hours of
operation* or
after a further 100 hours
of operation* or
after 3 months*
after one year*
after a further
year*
To Next Page
Loading...
