2. Adjust the stem
Rotate the stem 90° clockwise to align with the front fender. Tighten the screws
with an Allen key #5 to ensure the stem stays in line with the front fork.
STEP 1
90°
Rotate
#5 Allen key
tighten
Unboxing Guide Unboxing Guide
5 6
Allen key #6
smooth
3. Attach the pedals
Take the pedals out of the box. The left side pedal has threads on the axle.
Screw onto the left crank by hand in an anticlockwise direction.
Tighten the pedal using Allen key #6.
Allen key #6
has threads on the axle
STEP 1
The axle of the right side pedal is smooth.
Screw onto the right crank by hand in a clockwise direction.
Tighten the pedal using Allen key #6.
STEP 2
To Next Page
Loading...
