5/17
3 - MIXING TRACKS
Mixing tracks means to link up songs,
one after another, without any gaps or
silences between them.
3.1 You have loaded a track on each deck
(A and B).
3.2 You start off by playing the track on
deck A.
3.3 Move the crossfader towards the
deck that is playing a track (in this
case, towards the left).
3.4 Before the playing track ends, start
playing the track loaded on deck B.
3.5 To ensure a transition at the same
tempo, synchronize the BPM (beats per
minute) of the track that is still to be played.
To do this, press the SYNC button on deck
B (1) to match the BPM of this track with
the BPM of the track that is about to end
(on deck A). Or you can adjust the BPM to
match the BPM of the track on deck A using
the SHIFT button and the jog wheel (2).
3.6 To make the transition, progressively
move the crossfader toward the deck on
which the new track is being played
(here, to the right).
To Next Page
Loading...
Need help?
General
