Page 7For technical questions, please call 1-888-866-5797.Item 64751
MAINTENANCE
Procedures not specifically explained
in this manual must be performed
only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Turn the power switch of the miter saw
mounted on the Miter Saw Stand off, and
unplug the tool from its electrical outlet before
performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL
FAILURE:
Do not use damaged equipment.
If abnormal noise or vibration occurs, have
the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the Stand. Check for:
• loose hardware
• misalignment or binding of parts
• cracked or broken parts
• loose or improper mounting of the miter saw
• any other condition that may
affect its safe operation.
2. AFTER USE, wipe external surfaces
of the Stand with clean cloth.
3. Periodically, lightly lubricate all
moving parts of the Stand.
To Next Page
Loading...
Need help?
General
