Hercules HA71 User Manual

PROFESSIONAL ROLLING MITER SAW STAND
Model
HA71
Owner’s Manual &
Safety Instructions
18h
WARNING: To prevent serious injury, User must read and
understand Owner’s Manual. SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and
undamaged. If any parts are missing or broken, please call
1-888-866-5797 as soon as possible. Reference 64751

Hercules HA71 Specifications

General

Brand	Hercules
Model	HA71
Category	Racks & Stands
Language	English

Summary

Important Safety Information

Prior to Using This Product

Read and understand all instructions and safety precautions before use.

Miter Saw Stand Placement

Ensure the stand is on a flat, level, hard surface capable of supporting the weight.

Secure Miter Saw to Stand

Bolt the miter saw securely to the mounting brackets and test stability.

Keep Guards in Place

Ensure all guards are in place and in working order during operation.

Support Workpiece During Operation

Make sure the workpiece is supported at all times using extension arms if needed.

Electrical Safety

Unplug the miter saw before any service, maintenance, or moving the stand.

Wear Safety Goggles

Always wear ANSI-approved safety goggles during assembly and use.

Weight Capacity and Loading

Do not exceed weight capacity; be aware of dynamic loading.

Folding and Unfolding Precautions

Product Use and Supervision

Stay Alert and Use Common Sense

Vibration Safety

Medical Check-ups for Vibration

Setup and Assembly

Set Up Instructions

Assembly Steps

Attaching Mounting Brackets

Mounting the Saw

Place saw on brackets, secure with bolts, washers, and nuts.

Removing the Saw

Replacing the Saw

Operation and Storage

Adjusting Extension Arms

Adjusting Workpiece Supports

Maintenance

Pre-Use Inspection