To Next PageTo Next PageWhat to do if Hercules Sander performance decreases over time?
If you notice the performance of your Hercules Sander decreasing over time: * The carbon brushes may be worn or damaged. Have a qualified technician replace them. * The battery pack might be wearing out. Battery pack capacity decreases through use. If the symptoms are severe, recycle the old battery pack (or dispose of it properly) and replace it.
Why Hercules Sander makes excessive noise or rattling?
Excessive noise or rattling in your Hercules Sander can be caused by internal damage or wear, such as to the carbon brushes or bearings. Have a technician service the tool.
Overall safety guidelines for power tool operation.
Safety measures for maintaining a clean and safe workspace.
User protection measures including PPE and alertness.
Precautions to prevent electric shock hazards.
Procedure for charging the battery pack before use.
Instructions for installing the auxiliary handle.
Steps for preparing the tool for operation.
Guidelines for preparing the work area and workpiece.
Detailed steps for polishing operations.
Overall safety guidelines for power tool operation.
Safety measures for maintaining a clean and safe workspace.
User protection measures including PPE and alertness.
Precautions to prevent electric shock hazards.
Procedure for charging the battery pack before use.
Instructions for installing the auxiliary handle.
Steps for preparing the tool for operation.
Guidelines for preparing the work area and workpiece.
Detailed steps for polishing operations.
General| Power | 350 W |
|---|---|
| Dust extraction | Yes |
| Power source | Electric |
| No-load speed | 12000 rpm |
| Sander type | Random orbital sander |
