Page 10 For technical questions, please call 1-888-866-5797. Item 57348
Installing a Threaded Accessory
TO PREVENT INJURY: Wear heavy-duty work
gloves when handling wire wheels and brushes.
These accessories are sharp and can cause
injury. Do not exceed maximum rated speed of
brush. Do not use a damaged brush. Replace
damaged brushes immediately. Damaged
or worn brushes will forcefully shoot wires
into all objects not covered by the guard.
1. The accessory MUST be:
• rated to at least 10,000/min
• no larger than 6" in diameter
• fitted with a threaded opening of 5/8" x 11 TPI.
• undamaged
• a sanding disc and backing pad, a sanding
flap disc, a wire wheel or a wire cup
brush (accessories not included).
2. Press in and hold the Spindle Lock Button
to prevent the Spindle from turning.
3. Remove the Flange Nut and the
Flange and keep in a safe place.
4. Thread disc accessory firmly onto the
Spindle. Wrench tighten onto the Spindle.
WARNING! TO PREVENT SERIOUS INJURY,
Use only 4.5" grinding wheels with 4.5" guards.
Use only 5" grinding wheels with 5" guards.
Use only 6" grinding wheels with 6" guards.
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Route the power cord along a safe route
to reach the work area without creating a
tripping hazard or exposing the power cord to
possible damage. The power cord must
reach the work area with enough extra length
to allow free movement while working.
3. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
4. There must not be hazardous objects, such
as utility lines or foreign objects, nearby that
will present a hazard while working.
5. You must use personal safety equipment including,
but not limited to, ANSI-approved eye and hearing
protection, as well as heavy-duty work gloves.
6. Before beginning work, provide for sparks and
debris that will fly off the work surface.
To Next Page
Loading...
Need help?
General
