Hercules HH78S - Attaching Brackets to Band Saw; Bracket Attachment for Hercules;Bauer

Page 5For technical questions, please call 1-888-866-5797.Item 59640
Attaching Bracket to Band Saw
Hercules Corded and Cordless
1. Remove Nut and Bolt from Handle,
then remove Handle.
Handle
Bolt
Nut
2. Attach Bracket (32) using Bolt and
Nut from Handle, finger tighten.
Bracket
(32)
Handle
Bolt
Handle
Nut
Bauer Corded and Cordless
1. Remove Bolt from Handle, then remove Handle.
Handle
Bolt
2. Remove upper Bolts from housing.
Upper
Bolt
Upper
Bolt
3. Attach Bracket (33), using
housing Bolts, finger tighten.
Housing
Bolts
Bracket
(33)
Milwaukee Corded and Cordless
1. Remove Bolt from Handle, then remove Handle.
Bolt
2. Attach Bracket (34), using Bolt
from Handle, finger tighten.
Bracket
(34)
Handle
Bolt