Hercules HH78S User Manual

Universal Portable Band Saw
Benchtop Stand
Model
HH78S
WARNING: To prevent serious injury, User must read and
understand Owner’s Manual. SAVE THIS MANUAL.
When unpacking, make sure that the product is intact and undamaged.
If any parts are missing or broken, please call 1-888-866-5797
as soon as possible. Reference 59640.
Owner’s Manual &
Safety Instructions
22l

Hercules HH78S Specifications

General

Brand	Hercules
Model	HH78S
Category	Saw
Language	English

Summary

Hercules Universal Portable Band Saw Benchtop Stand

Owner's Manual and Safety Instructions

Provides comprehensive guidance on operation and safety for the Hercules band saw stand.

Model HH78S Identification

Specifies the model number HH78S for the Hercules portable band saw benchtop stand.

Critical Safety Warning

Emphasizes the necessity for users to read and understand the owner's manual to prevent serious injury.

Important Safety Information

General Safety Precautions

Details essential safety warnings and instructions for operating the band saw stand to prevent accidents.

Vibration Safety Guidelines

Advises on reducing risks of physical injury from tool vibration during extended use.

Safety Symbols and Product Specifications

Warning Symbol Definitions

Explains hazard alert symbols used in the manual to denote potential injury risks.

Product Specifications

Lists compatibility with band saw brands and cutting capacity details.

Setup and Functional Description

Pre-Use Setup Procedures

Outlines critical steps and warnings before setting up and using the band saw stand.

Band Saw Stand Components

Identifies the various parts and features of the band saw stand through a functional diagram.

Attaching Brackets to Band Saw

Bracket Attachment for Hercules/Bauer

Step-by-step instructions for attaching brackets to Hercules and Bauer band saw models.

Bracket Attachment for Milwaukee/Dewalt

Step-by-step instructions for attaching brackets to Milwaukee and Dewalt band saw models.

Attaching Band Saw to Stand

Securing the Band Saw Unit

Details the process of mounting the band saw onto the stand using provided hardware.

Alignment and Final Tightening

Instructions for adjusting and securely tightening the band saw once mounted on the stand.

Installation Procedures

Trigger Switch Installation

Guidance on installing and connecting the trigger switch for proper operation.

Vertical Stand Mounting

Instructions for mounting the stand in a vertical position on a stable surface.

Hercules and Bauer Table Installation

Table Installation Steps

Procedure for installing the table for Hercules and Bauer band saw models.

Milwaukee and Dewalt Table Installation

Table Installation Steps

Procedure for installing the table for Milwaukee and Dewalt band saw models.

Operating Instructions

Work Area Setup and Safety

Guidelines for preparing a safe and clean work area for band saw operation.

Horizontal Operation Guide

Instructions for performing cuts and adjustments when operating the band saw horizontally.

Vertical Operation Guide

Types of Cuts

Explains standard and contour cuts, including proper workpiece handling.

Maintenance and Care

Pre-Use Inspection

Checklist for inspecting the tool's general condition before each use.

Post-Use Cleaning and Storage

Guidance on cleaning the tool after use and storing it properly indoors.

Parts List and Diagram

Component Identification

Detailed list of all parts with descriptions and quantities for the band saw stand.

Assembly Diagram

Limited 90 Day Warranty