Hercules Stream 100 - Server Access

34
Server access
This submenu lets you connect third-party apps to
Hercules Stream Control.
OBS:
1. To link OBS to Hercules Stream Control, open the
OBS app.
2. In the Tools tab, select WebSocket Server
Settings.
3. In Plugin Settings, tick Enable WebSocket
Server.
4. In Server settings:
o enter "4455" in the Server Port box;
o tick Enable Authentication;
o set a server password in the Server
password box.
5. Click Apply, and then click Ok.
6. In the OBS Access section of Hercules Stream
Control, enter the same number and password in
Server Port and Server password as in OBS.
7. Click Save.