EasyManua.ls Logo

hergom SERE 70 - 5 - CLEANING; THE FRONT; THE GLASS PANE; BAFFLE PLATE

hergom SERE 70
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 - CLEANING
THE FRONT
Preferably clean when the Fireplace is cold, using a
slightly damp cloth.
THE GLASS PANE
Fireplace window cleaning liquids are eecve
products.
Never try to clean the glass while the replace is
working. We recommend using HERGOM window
cleaning products.
Replacing: the glass pane in your replace is made
of thermal material, especially manufactured for
log and/or coal replaces. If it should break due
to an accident, it must be replaced by another
glass pane with the same technical specicaons.
Contact our Distributor to provide you with the
appropriate glass pane, together with instrucons
on how to assemble and seal it.
BAFFLE PLATE
Slide the deector up, li one side more than
the other unl it can be pulled down between
the two dollies and remove from the replace.
Pay aenon to the vermiculite, it is very fragile
(Fig. 6 - 7 - 8).
Clean the deector on both sides at least once
each season using a brush. This will facilitate
the transmission of air through the plate and
avoid its deterioraon to a great extent.
Replace the deector following the steps
indicated above in reverse order.
FIG. 6
FIG. 7
FIG. 8
JOINTS AND SEALS
It is advisable to perform a visual inspecon of the
door joints at the beginning and in mid-season to
ensure they are airght. If necessary, contact our
Distributor to supply you with the appropriate seal,
along with assembly instrucons.

Related product manuals