HermanMiller RATIO User Manual

IMPORTANT!
Please read this guide thoroughly before beginning
installation. It is strongly recommended that installation be
performed by at least 2 people. Failure to do so may result
in product damage and / or personal injury. Please save
these instructions for disassembly or reconfiguration.
IMPORTANTE!
Leggere interamente questa guida prima di iniziare
l’installazione. Si raccomanda vivamente che l’installazione
sia e.ettuata da almeno 2 persone. Una negligenza può
causare danni al prodotto e/o lesioni personali. Conservare
questa istruzioniqueste istruzioni per lo smontaggio o la
riconfigurazione.
IMPORTANT!
Veuillez lire ce guide en entier avant de commencer
l’installation. Il est fortement recommandé qu’au moins
deux personnes réalisent l’installation. Le non-respect de
cette consigne risque d’endommager le produit et / ou
d’entraîner des blessures corporelles. Veuillez conserver
ces instructions pour le démontage ou la reconfiguration.
WICHTIG!
Bitte lesen Sie dieses Handbuch sorgfältig, bevor Sie mit der
Installation beginnen. Es wird stark empfohlen, dass die
Installation von zwei Personen durchgeführt wird. Wird
dieses versäumt, kann dieses zu Produkt- und/oder
Personenschaden führen. Bitte bewahren Sie diese
Anleitung für Abbau oder Neukon guration auf.
BELANGRIJK!
Lees deze handleiding vóór de installatie zorgvuldig door.
De installatie dient bij voorkeur door ten minste twee
personen te worden uitgevoerd. Indien dit niet gebeurd,
kan dit leiden tot schade aan het product en/of persoonlijk
letsel. Bewaar deze instructies voor demontage of hercon-
figuratie.
ATENCIÓN
Lea detenidamente esta guía antes de comenzar la
instalación. Se recomienda encarecidamente que la
instalación se lleve a cabo entre dos personas como
mínimo. De lo contrario, se podrían ocasionar daños en el
producto o lesiones corporales. Guarde las instrucciones de
uso para el desmontaje o la reconfiguración del producto.
RATIO
®
Installation guide

HermanMiller RATIO Specifications

General

Brand	HermanMiller
Model	RATIO
Category	Indoor Furnishing
Language	English

Summary

Assembly Tools

Product Orientation

Cluster Desk Assembly

Cross Beam and E-Beam Installation

Installing the cross beam and E-Beam components.

Worksurface Support, Screen Bracket, and Wire Management

Mounting worksurface support, screen brackets, and wire trays.

Lower Tray Hinged Lid, Spacing Plate, and Risers

Installing lower tray lid, spacing plates, and risers.

Wiring and Cable Management

Motor Cables, Anti Collision Sensor, and Control Box

Connecting motor cables, sensor, and control box.

Worktop and Control Box Wiring

Wiring the worktop and standard control box.

Umbilical System Installation

Installing the umbilical system for cable management.

Crank Kit Installation

Crank Kit Installation

Installing the crank kit for manual desk operation.

Freestanding Desk Assembly

Foot and E-Beam Assembly

Installing feet and E-Beam components for freestanding desks.

Worksurface Support, Spacing Plate, and Wiring

Mounting worksurface support, spacing plates, and wiring.

Component Installations

Worktop and Control Box Installation

Installing the worktop, control box, and sensor.

Lower Tray and Wire Management Installation

Installing lower tray and wire management components.

Screen Bracket Installation

Attaching screen brackets to the desk structure.

Specialized Assembly Variants

Umbilical and Crank Kit Variants

Different installations for umbilical and crank kit systems.

120° Cluster Desk Assembly

120° Cluster Desk Frame Components

Installing cross beam, E-beam, and worksurface support.

120° Cluster Desk Accessories

Installing screen brackets, risers, and wire management.

120° Cluster Desk Spacing and Worktop

Installing spacing plates and worktops for 120° cluster desks.

Umbilical System Installation

Umbilical System Installation Details

Various methods for installing the umbilical system.

Wiring and Control System Connections

Motor Cables, Control Switch, and Amplifier Box

Connecting motor cables, control switch, and amplifier box.

Strain Gauge and Collision Detection Connections

Connecting strain gauge and collision detection components.

Standard Control Box Connection

Connecting the standard control box.

Notes and Operation

General Notes and Safety Precautions

General notes on desk operation and safety precautions.

Collision Detection System Operation

How to use and activate the collision detection system.

Control Box Activation and Manual Reset

Activating the control box and performing manual resets.

Control Switch Adjustments and Usage

Storing Preferred Desk Heights

Saving preferred desk heights on the control switch.

Using Stored Height Settings

Recalling stored desk height settings.

Error Codes and Troubleshooting

LED Control Switch Error Codes

Listing and explaining common error codes and solutions.

Desk Not Reaching Full Height Troubleshooting

Troubleshooting when the desk does not reach full height.

Product Certification

Product Certification Mark Information

Information on product certification and safety marks.