HermanMiller Embody User Manual

HermanMiller Embody
®
Chair Adjustment Guide1
Seating that
performs for you.
Herman Miller
Embody
®
Chair
Seat Depth: Front handles on the right and le sides of the seat
Seat Height: Joystick inside tilt tension knob, right side of chair
To increase or decrease depth:
Li your thigh weight from the front
of the seat. Gently li up the front
handles on the right and le sides of
the seat to disengage the locking seat
depth adjustment. Slide seat forward
or back into proper depth for use; then
release downward to lock the seat.
In the proper position, you will have approximately three-ngers of clearance
between the back of your knees and the seat edge.
Only available on some models.
To raise seat:
Angle the joystick fully and li your
weight to raise the seat height to the
desired level.
To lower seat:
While seated, angle the joystick fully
and lower seat.
At the proper height, your feet should rest flat on the floor.
Tilt Limiter: Back horizontal tab on le side behind seat
Tilt Tension: Knob below right side of seat
Only available on some models.
To engage:
Recline and move tab up to dene
the limit of recline.
To release:
Lean forward and flip tab fully
downward.
Engage the tilt limiter when you want to sit in an upright or partially
reclined position.
To increase tension:
Turn knob clockwise.
To decrease tension:
Turn knob counterclockwise.
Set the tilt tension to control the resistance you feel when leaning back.

HermanMiller Embody Specifications

General

Chair Type	Office Chair
Seat Depth	16.75 inches
Backrest Height	29.5 inches
Weight Capacity	300 lbs
Adjustable Armrests	Yes
Lumbar Support	Yes
Recline	Yes
Manufacturer	Herman Miller
Width	29.5 inches
Weight	51 lbs
Back Height	29.5 inches
Designer	Bill Stumpf and Jeff Weber
Back Support	Yes
Seat Height	16 to 20.5 inches
Warranty	12 years
Adjustability	Seat height
Dimensions	29.5" W x 29.5" D x 43.5" H
Material	Leather

Summary

Seat Height Adjustment

Adjust Seat Height

Use joystick to raise or lower seat to desired level, ensuring feet rest flat.

Tilt Tension Control

Adjust Tilt Tension

Turn knob clockwise to increase, counterclockwise to decrease resistance.

Seat Depth Adjustment

Adjust Seat Depth

Lift thigh weight, lift handles, slide seat, release to lock for proper depth.

Tilt Limiter

Control Recline Limit

Move tab up to engage, down to release for desired recline position.

Arm Height Adjustment

Adjust Arm Height

Press button, pull arm up or down to desired position, release to lock.

Arm Width Adjustment

Adjust Arm Width

Place hands on armpad, pull in or push out to adjust width.

BackFit™ Adjustment

Configure Back Support

Turn knob to adjust chair back for optimal lumbar support and posture.