Need help?Do you have a question about the Hermle Z 307 and is the answer not in the manual?
General safety instructions and points of potential dangerous situations.
Step-by-step guide for connecting and setting up the centrifuge.
Describes various warning symbols and their meanings.
Outlines critical safety precautions and potential hazards.
Lists mandatory rules for safe and correct operation.
Guide to installing and loading rotors, including angle and swing-out types.
Information on maximum load limits and density considerations for rotors.
Setting the desired rotational speed or relative centrifugal force.
How to set the duration for the centrifugation run.
Explains how the centrifuge detects and responds to rotor imbalance.
How to program delayed start or end times for centrifugation.
Detailed steps for cleaning the centrifuge unit and rotor chamber.
Procedures for cleaning and disinfecting rotors, lids, and adapters.
Introduction to troubleshooting error messages and seeking feedback.
Procedure to manually open the lid during a power failure.
General| Type | Centrifuge |
|---|---|
| Max. Speed | 15, 000 rpm |
| Max. Capacity | 4 x 100 ml |
| Speed Range | 200 - 15, 000 rpm |
| Weight | 21 kg |
| Power Supply | 230V, 50/60Hz |
| Timer | 1 - 99 min / continuous |
To Next Page
