Need help?Do you have a question about the Hermle Z 326 and is the answer not in the manual?
Provides essential safety guidelines and warnings for operating the centrifuge.
Specifies the designed application and context for the Hermle centrifuge.
Offers a concise summary of the Z 326 centrifuge's features and capabilities.
Lists the items included with the Hermle Z 326 centrifuge upon delivery.
Details the various fields and symbols shown on the centrifuge's LCD screen.
Covers general symbols like direction of rotation and disposal instructions.
Details the information found on the centrifuge's product identification plate.
Explains specific warning and information signs encountered on the centrifuge.
Outlines critical dangers, necessary precautions, and warranty considerations.
Lists crucial rules that must be followed for safe and correct centrifuge operation.
Provides information regarding the warranty coverage for the centrifuge and rotors.
Instructions on how to safely unpack the Hermle Z 326 centrifuge.
Specifies the necessary clearance and environmental conditions for installation.
Step-by-step guide for connecting and setting up the centrifuge.
Instructions on how to enter the mode for accessing operating data and settings.
Guides on how to turn the audible signals of the centrifuge on or off.
Explains how to set the volume level for the centrifuge's sound signals.
Details how to select the audio notification for the end of a centrifugation run.
Instructions on enabling or disabling audible feedback for button presses.
How to access and view the centrifuge's operational data and history.
Guides on correctly installing and loading samples into angle rotors.
Step-by-step instructions for securely installing rotors onto the centrifuge drive shaft.
Principles for symmetrical loading and balancing of samples in angle rotors.
Instructions for properly loading buckets and samples into swing-out rotors.
Guidelines on permitted load weights and how to avoid overloading rotors.
Instructions for safely detaching a rotor from the centrifuge drive shaft.
How to open the centrifuge lid after a run or in case of emergency.
Explains how the lid is secured and the indicators for readiness to start.
How to set the desired rotational speed (rpm) or force (RCF) for a run.
Instructions for setting the desired duration for a centrifugation run.
How to adjust the ramp-up and ramp-down speeds of the centrifuge.
How to save specific run parameters for later use.
Instructions on how to load previously saved program settings.
Steps to exit the program management mode and return to normal operation.
How to start a run using either the 'start' or 'quick' function keys.
Explains the function of the 'stop' key for interrupting a run.
Describes how the centrifuge detects and responds to rotor imbalance.
Covers routine maintenance and cleaning protocols for the centrifuge and its components.
General advice on cleaning, lubrication, and care of the centrifuge and accessories.
Detailed steps for cleaning and disinfecting the centrifuge housing and chamber.
Instructions for cleaning and disinfecting rotors, lids, and adapters.
Procedure for disinfecting aluminum rotors, especially after spills.
Guidelines for autoclaving and other disinfection methods for PP rotors.
Procedures for cleaning up glass splinters and preventing damage.
Information on the expected service life of rotors and accessories.
Provides solutions for common error messages displayed by the centrifuge.
A comprehensive list of potential error messages and their corresponding solutions.
Steps to manually open the lid in case of a power failure or malfunction.
Explains the system for displaying and interpreting error messages.
Information and requirements for returning centrifuges for repair or service.
Instructions for safely transporting the centrifuge, including packaging and aids.
Specifies the recommended environmental conditions for storing the centrifuge.
Information on the proper disposal of the centrifuge according to regulations.
Official declaration confirming the product meets EC directives and standards.
Detailed technical specifications, including dimensions, power, and performance.
Lists the maximum allowable weight for various centrifuge rotors.
Specifies the maximum speed and RCF values for each permissible rotor.
Provides acceleration and deceleration times for different levels and rotors.
A comprehensive list of error codes and their descriptions.
Data for adjusting centrifugal radius when using specific adapters or tubes.
Additional data for radius correction with various rotors and adapters.
Further data for radius correction with specific rotors and adapters.
Defines common symbols and abbreviations used in the manual.
Form for certifying decontamination of returned goods for repair.
General| Brand | Hermle |
|---|---|
| Model | Z 326 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
