Need help?Do you have a question about the Hermle Z300 and is the answer not in the manual?
Safety precautions and hazard warnings for centrifuge operation.
Overview of the centrifuge's features and capabilities.
Compliance with relevant safety regulations and standards.
Technical specifications and parameters for the Z400 model.
List of included accessories and spare parts with the centrifuge.
Information regarding the warranty coverage for the centrifuge.
Steps for safely removing the centrifuge from its packaging.
Guidelines for safely moving the centrifuge.
Information on the necessary space and placement for the centrifuge.
Instructions for setting up and connecting the centrifuge.
Procedure for installing and fastening swing-out rotors.
Procedure for installing and fastening angle rotors.
Procedure for installing and fastening hematocrit rotors.
Guidelines on maximum load limits and speeds for rotors.
Instructions on how to safely detach a rotor from the centrifuge.
How to turn the centrifuge on and off using the power cord.
Procedure for opening the centrifuge lid.
Information on the lid locking mechanism and its function.
Setting the desired rotational speed or relative centrifugal force.
Setting the desired run time for the centrifuge.
Using the control panel keys to start and operate the centrifuge.
How to stop the centrifuge during operation.
Information on temperature control and its effect during centrifugation.
How the centrifuge handles unbalanced rotor loads.
Procedures for regular servicing and safety inspections.
Instructions for cleaning and maintaining the centrifuge.
Procedures for cleaning the centrifuge after glass breakage.
Guidelines for disinfecting the centrifuge in case of contamination.
How to manually open the lid in case of power failure.
Troubleshooting guide for common errors and fault codes.
Table for calculating relative centrifugal force (RCF) values.
General| Brand | Hermle |
|---|---|
| Model | Z300 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
