44
Over inflation/Under inflation will affect the
performance.
CAUTION
!!
Inspection
Whenever you check the tyre pressure, you
should also examine tyre treads & side walls
for wear, damage & foreign objects.
Look for:
î Bumps or bulges in the side of the tyre or
the tread. Replace the tyre if you find any
bumps or bulges.
î Cuts, splits or cracks in the tyre. Replace the
tyre if you can see fabric or cord.
î Excessive tread wear.
Tread Wear
î Carefully inspect the tyres for any damage,
if the vehicle hits a pothole or hard object.
Replace tyres immediately when the wear
indicator (1) appears on the tyre. The tread
limits are:
MINIMUM TREAD DEPTH:
Front: 0.8 mm Rear: 1.0 mm
Check the tread wear indicator for tyre wear.
(1) Tread wear indicator (2) Arrow mark
2
1
To Next Page
Loading...
