50
(1) Headlamp adjusting bolts
î Tighten the bolt after adjustment.
WARNING
!!
An improperly adjust headlamp may blind
oncoming rider/driver or it may fail to light
the road for a safe distance.
SUSPENSION
Inspection
Front Rear
B
A
(1) Pin spanner (2) Rear shock absorber
NOTE
Always adjust both the rear shock absorbers
to the same position. To adjust the rear shock
absorber (2), use the rear shock absorber
adjustment tool (Pin spanner) (1) available in
the tool kit.
1
1
2
Rear shock absorber adjustment can be made
according to the load/road conditions.
î Check the rear shock absorber by pushing
hard downwards on rear grip while the
vehicle is not parked on stand. The
suspension action should be smooth and
their should be no oil leakage.
Rear Shock Absorber Adjustment
î Check the front forks by locking the front
brake and pumping the front fork up and
down vigorously. The suspension action
should be smooth and there should be no oil
leakage.
î In direction A Stiffer
î In direction B Softer
To Next Page
Loading...
