(4) Element air cleaner
Install a new air cleaner element in the
reverse order of removal.
4
Never wash or blow air to clean the
element. Always replace the element with a
new one according to the maintenance
schedule.
Check for smooth rotation of the throttle
grip from the fully open to the fully closed
position. Check at full left and full right
steering positions. Inspection the condition
of the throttle cable from the throttle grip
down to the carburetor. If the cable is
kinked, chafed or improperly routed, it
should be replaced or rerouted. Standard
throttle grip free play (1) is approximately
2-6 mm of grip rotation.
Cable Inspection
THROTTLE OPERATION
46
To Next Page
Loading...
