50
Do not attempt to compensate for faults in
other systems by adjusting idle speed. Visit
your Authorised Hero MotoCorp
workshop for scheduled carburetor
adjustment.
B
A
1
Idle speed
IDLE SPEED : 1400 ± 100 r/min
NOTE
2. Adjust idle speed with the throttle stop
screw (1).
The carburetor is factory pre-set in order to
achieve optimum performance and meet
emission standards.
However in case of specific requirement of
tuning due to engine stalling in idle speed,
please follow the instruction given
hereunder :
CARBURETOR
1. Warm up the engine and park the
motorcycle on the main stand.
Before inserting the feeler gauge, smear a
bit of engine oil on the feeler gauge to avoid
damage to the feeler gauge.
(B) Decrease r/min
(1) Throttle stop screw
(A) Increase r/min
To Next Page
Loading...
