EasyManua.ls Logo

HERO SPLENDOR PRO - Starter Switch; Clutch Switch; Steering Lock

HERO SPLENDOR PRO
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Never hold starter switch continuously for
more than 10 seconds as continuous
cranking of engine will drain the battery.
There is a clutch switch provided for the
safety of the rider. The motorcycle cannot
be started by electric starter switch until the
clutch lever is operated when the vehicle is
engaged in gear.
STARTER SWITCH
Ensure starter switch (1) is operated when
the vehicle is in neutral gear. If the vehicle
is engaged in gear press the clutch lever
before operating the starter switch. Release
starter switch after the engine has started.
CLUTCH SWITCH
(2) Ignition key
1
(1) Electric starter switch
2
13
Steering lock with Ignition switch, put the
key (2) to "OFF" position & turn the
handle bar towards left or right & push the
key downwards & turn towards "Lock"
position. After locking take out the key.
STEERING LOCK

Related product manuals