24
For normal braking, close the throttle
and gradually apply both front and rear
brakes simultaneously while shifting
down gears to suit your road speed.
For maximum deceleration/quick
stopping, close the throttle and apply the
front and rear brakes simultaneously.
Extreme braking may cause wheel
locking and reduce control over the
motorcycle.
Wherever possible, reduce speed or
apply brake before entering turn,
closing the throttle or braking in mid
turn may cause wheel slip. Wheel slip
wi l l r educ e c o ntro l o v er th e
motorcycle.
When riding in wet or rainy conditions,
or on loose surfaces the ability to stop
the motorcycle reduces.
Independent use of only the front or
rear brake increases stopping distance.
When descending a long steep slope use
engine braking (power) by changing to
lower gears, with intermittent use of both
brakes. Continuous brake application
can overheat the brakes and reduce their
effectiveness.
All your actions should be smooth
under these conditions. sudden
accelerations, braking or turning may
cause loss of control. For your safety,
exercise extreme caution when
braking, accelerating or turning.
Do not shift gears without operating clutch
and without closing the throttle otherwise
this would lead to damage of gears.
While parking vehicle on side stand
engage the first gear.
"OFF", turn the ignition switch "OFF", park
BRAKING
PARKING
To Next Page
Loading...
