Need help?Do you have a question about the Hertz HCP 2 and is the answer not in the manual?
General| Input Sensitivity | 0.6 ÷ 6 V |
|---|---|
| Distortion - THD (100 Hz @ 4Ω) | 0.01% |
| Damping Factor (100 Hz @ 4Ω) | >100 |
| Pre-In | Yes |
| Speaker-In | Yes |
| Remote In | Yes |
| Output Power (RMS) @ 14.4 VDC | 65 W x 2 (4Ω) 95 W x 2 (2Ω) 190 W x 1 (4Ω) |
| S/N Ratio (A weighted @ 1 V) | >90dB |
| Signal-to-Noise Ratio | >90dB |
| Dimensions | 7.5" x 5.5" x 2.1" |
| Channel Mode | 2-channel |
To Next Page
