Need help?Do you have a question about the Hertz HP 4 and is the answer not in the manual?
Details HP 2 output power and S/N ratio per CEA standard.
Details HP 4 output power and S/N ratio per CEA standard.
Explains the +BATT, GND, REM, and Speaker Output terminals for HP 2.
Explains the +BATT, GND, REM, and Speaker Output terminals for HP 4.
Shows filter settings for various input/output configurations.
Presents filter settings for different channel configurations.
Describes filter settings like Full Range, Lo-Pass, and Hi-Pass for HP 2.
Explains filter settings for A channels of the HP 4 amplifier.
Explains filter settings for B channels of the HP 4 amplifier.
Describes how to adjust input sensitivity for optimal power output.
Details LED meanings and interpretation of protection event codes.
Explains how to calculate current consumption and select appropriate cable gauges.
Details voltage, current, bandwidth, and distortion for HP2/HP4.
Covers input sensitivity, impedance, output power, and filter types.
Detailed internal schematic showing signal flow for HP 2.
Detailed internal schematic showing signal flow for HP 4.
To Next Page
General
