HES 1006 series User Manual

1006 SERIES
HEAVY DUTY ELECTRIC STRIKES
Hanchett Entry Systems, Inc.
22630 N. 17th Ave.
Phoenix, AZ 85027
www.hesinnovations.com
1-11/16
[42.86]
3-3/8
[85.70]
1-1/2
[38.10]
1-3/4
[44.44]
2-1/16
[52.39]
1006 SERIES DIMENSIONS
DIMENSIONS:
INCH/MM
AD, HD, ND, TD -
OPTION
FACEPLATE
A, H, HT, N,T -
OPTION
FACEPLATE
AM, HM, NM -
OPTION
FACEPLATE
KM - OPTION
FACEPLATE
Z - OPTION
FACEPLATE
J, E - OPTION
FACEPLATE
K - OPTION
FACEPLATE
KD - OPTION
FACEPLATE
1-23/32
[43.64]
1-37/64
[40.08]
2-7/8
[73.02]
1-9/64
[28.83]
1/8
[3.17]
1-15/32
[37.29]
1-25/64
[35.48]
5/16
[7.79]
3-1/8
[79.37]
7/8
[22.23]
19/32
[15.46]
1-15/32
[37.29]
1-3/32
[27.81]
5/32
[3.97]
3-1/8
[79.37]
23/32
[18.26]
29/32
[23.39]
1-11/32
[34.11]
27/32
[21.46]
NOTE: Drawings are not to scale. This information is subject to change without notice. For questions, consult HES technical service helpline, 800-626-7590.
R - OPTION
FACEPLATE
1-3/4
[44.45]
27/32
[21.46]
23/32
[18.22]
4-1/8
[104.78]
2-1/8
[52.39]
3/4
[20.33]
3/8
[10.68]
3-3/8
[85.70]
4-7/8
[123.83]
5/8
[15.88]
1-1/4
[31.75]
1-11/32
[34.11]
23/32
[18.14]
4-7/8
[123.83]
4-1/8
[104.78]
1-1/16
[26.72]
©HES 2005
1
4036006.001 rev B
C
L
= center line of faceplate (2nd line = center line of opening)
INSTALLATION INSTRUCTIONS • Please read carefully before attempting installation.
Technical Service Dept. Helpline 800-626-7590 623-582-4626

HES 1006 series Specifications

General

Voltage	12/24 VDC
Endurance	1, 000, 000 cycles
Material	Stainless Steel
Strike Body Material	Steel
Holding Force	1500 lbs