HES 4500 Series - User Manual

4500 Series Electric Strike
Installation Instructions
HES, Inc.
22630 N. 17th Ave.
Phoenix, AZ 85027
800-626-7590
www.hesinnovations.com
1
Diagram 1: Electrical Specifications
ELECTRICAL RATINGS FOR SOLENOID
MINIMUM WIRE GAUGE REQUIREMENTS SOLENOID VOLTAGE
CONTINUOUS DUTY
12VDC
12VDC
50
.24
24VDC
24VDC
200 50 200
.12 .24-.32 .12
12-16VAC 24VAC
INTERMITTENT DUTY*
Resistance in Ohms
Amps
Solenoids are rated at +/- 10% indicated value.
*10% max duty cycle (2 min. max on time)
200 feet or less
200 - 300 feet
300 - 400 feet
18 gauge
16 gauge
14 gauge
18 gauge
18 gauge
16 gauge
3
7
5
2
4
1
ASSA ABLOY, the global leader
in door opening solutions
Product Components
Trim Enhancer (with screws)
12 & 24 Volt Pigtails
#12-24 Mounting Screws
1
2
4500 Electric Strike Body
Deadlatch Tab for Mortise locksets
5
7
3
Screws for Deadlatch or Filler Tabs
Filler Tab for Cylindrical Locksets
4
6
6

Summary

Product Components

4500 Electric Strike Body

The main body of the 4500 series electric strike.

Deadlatch Tab for Mortise Locksets

Component for mortise lockset compatibility.

Screws for Deadlatch or Filler Tabs

Fasteners used to secure deadlatch or filler tabs.

Filler Tab for Cylindrical Locksets

Component for cylindrical lockset compatibility.

Trim Enhancer

An accessory that enhances the strike's appearance and function.

12 & 24 Volt Pigtails

Power connection wires for 12V and 24V systems.

#12-24 Mounting Screws

Screws used for mounting the electric strike unit.

Electrical Specifications

Installation Directions

Prepare Strike

Steps for preparing the electric strike for installation.

Prepare Frame

Instructions for preparing the door frame for the strike.

Finish Installing

Final steps for attaching the electric strike to the jamb.

Installation Diagrams

Latchbolt Monitor Wiring

Diagram illustrating wiring for Latchbolt Monitor (LBM).

Strike Monitor Wiring

Diagram illustrating wiring for Strike Monitor (LBSM).

Cylindrical Locksets

Diagram showing strike installation for cylindrical locksets.

Mortise Locksets

Diagram showing strike installation for mortise locksets.

Jamb View

Shows the strike installed in the jamb with dimensions.

Jamb Cutout Dimensions

Provides detailed dimensions for jamb cutout.

Cutout Templates

4500 with Cylindrical Lockset

Template for cutting the frame for cylindrical locksets.

4500 with Mortise Locksets

Template for cutting the frame for mortise locksets.

4500 with Schlage L9000 & Yale 8700

Template for specific lock models Schlage L9000 & Yale 8700.

HES 4500 Series Specifications

General

Brand	HES
Model	4500 Series
Category	Locks
Language	English