HES 9600 GENESIS - User Manual

9600 GENESIS ELECTRIC STRIKE
Surface Mounted, Dual Locking, Dual Voltage, Heavy Duty
Intended for U.L. 10C listing as a Fire Door Accessory Device (Fail Secure Only)
Intended for U.L. Burglary Resistance 1034
INSTALLATION INSTRUCTIONS • Please read carefully before attempting installation
Hanchett Entry Systems, Inc.
2040 West Quail Ave,
Phoenix, AZ 85027
www.hesinnovations.com
Technical Service Dept. Helpline 800-626-7590
© HES 2001 1
DIMENSIONS:
INCH/MM
An ASSA ABLOY group company
NOTE: Drawings are not to scale. This information is subject to change without notice.
For questions, consult HES technical service helpline, 800-626-7590.

Summary

Installation Instructions

9600 Series Dimensions and Mounting

Key physical dimensions and mounting details for the 9600 electric strike installation.

Aluminum Jamb Installation Guide

Step-by-step instructions for installing the electric strike in an aluminum door jamb.

Metal Jamb Installation Guide

Step-by-step instructions for installing the electric strike in a metal door jamb.

Electric Strike Configuration

Field Reversable: Fail Secure to Fail Safe

Instructions to convert the electric strike's operation mode from fail-secure to fail-safe.

Installation Aids

9600 Genesis Installation Template

Full-size template for accurate marking and drilling during electric strike installation.

Electrical and Troubleshooting Information

12;24 Volt Wiring Diagrams and Specs

Wiring diagrams, electrical ratings, and wire gauge requirements for 12/24V systems.

Electric Strike Troubleshooting Guide

Guide to diagnose and resolve common mechanical and electrical issues with the electric strike.

HES 9600 GENESIS Specifications

General

Voltage	12/24 VDC
Strike Body Material	Stainless Steel
Endurance	1, 000, 000 cycles
Fire Rated	Yes
UL Rating	UL 1034
Frame Type	Metal
Battery Life	Not applicable