HES ASSA ABLOY KS200 - User Manual

1 of 8
KS200 (Wiegand) & KS210 (OSDP)
Integrated Wired Server Cabinet Lock
Installation & Operating Instructions
Product Contents
A KS200/KS210 Lock Body
B Lock Interface Cable
C Rear Mounting Bracket
D Connectors (3)
E Screws (3) #8/32 x 1/4"
Pan Head Phillips
F Locking Cam
G Screw (1) #1/4-20 x 1/2"
Truss Head Phillips
H SFIC Cam & Spacer
I Plug-In External DPS Adapter
(Optional)
Recommended Tools
• Phillips #2 Screwdriver
• Cutting Wheel (As Required)
Recommended Accessories
• SFIC Mechanical Core and Keys
• KS-DPS Door Open/Closed Status
• CBL6-QC12 6 ft Door Interface Cable
• CBL12-QC12 12 ft System Side Interface Cable
• WT-2 Securitron Wiegand Test Box
Operation
To activate the KS200/KS210 integrated electronic access control
Server Cabinet Lock, present a known/valid credential to the card
reader. For emergency override, insert a valid key in to the SFIC (Small
Format Interchangeable Core) cylinder and rotate to the unlocked
position. Upon access granted, verify functionality by lifting and
rotating the handle to release the locking cam and open the door.
NOTE: The unit shall be powered by a UL294 listed power supply or access control
output with a power limited Class 2 output. The DC input feed to the device shall be
protected by 1A max rated over current protection provided at the installation site.
ASSA ABLOY recommends the use of Securitron and Life Safety Power power
management products for use with ASSA ABLOY branded electromechanical
and integrated electronic access control locking devices.
A
B
Diagram 1: Product Components
C
D
E
F
G
H
I
WARNING: This product can expose you to chemicals including lead, which is known to the state of California
to cause cancer and birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
KS200
• Contains FCC ID:
JQ6-ICLASSBTM
• Contains IC ID:
2236B-ICLASSBTM
• WPC ID: ETA-SD-20210402373
KS210
• FCC ID: VC3-KS210
• IC ID: 7160A-KS210
• WPC ID: ETA-SD-20210402371

Summary

Operation

Operation

Describes how to activate the lock using credentials or emergency override.

Product Contents

Product Contents

Lists all items included in the KS200/KS210 lock package.

Specifications

General Specifications

Details physical, electrical, and environmental specifications of the lock.

Current Consumption

Provides standby, average, and peak current draw values for the device.

Certifications and Listings

Lists compliance certifications and performance levels for the lock.

Credential Formats Supported

Details supported RF, Wiegand, and OSDP credential technologies.

Mounting

Mounting Instructions

Step-by-step guide for physically installing the lock body into the cabinet door.

Configuration Steps

DPS Adapter Activation

Explains how to activate the external DPS adapter for monitoring.

Rear Mounting Bracket

Instructions for attaching the rear mounting bracket to the lock body.

Locking Cam Installation

Details the procedure for installing the locking cam securely.

Cam and Override Installation

Cam Selection

Guides on selecting the correct cam length and depth for the application.

SFIC Key Override

Instructions for installing the SFIC cylinder for emergency key override.

Connections and Wiring

Server Cabinet Wiring Example

Illustrates typical wiring connections for the server cabinet lock.

Cable and Wire Assignments

Details wire color/function assignments for new and legacy models.

System Integration and Testing

Optional Quick Connect Guide

Guide for connecting optional interface cables for system integration.

System Side Connections

Instructions for connecting bare wires to the third-party access control system.

Round Trip Loss Notes

Notes on Wiegand/OSDP data wire reuse and cable length limitations.

Additional OSDP Information

Provides links to resources for understanding OSDP protocol.

Testing and Commissioning

Steps to verify lock functionality after installation and power-up.

Regulatory and Warranty

Regulatory Compliance

Contains FCC and Canada Radio Certification compliance statements.

CE Marking

Declares compliance with essential EU Directive requirements.

Warranty Information

Information regarding warranty coverage and replacement options.

HES ASSA ABLOY KS200 Specifications

General

Brand	HES
Model	ASSA ABLOY KS200
Category	Locks
Language	English